427ci 685Hp SBC Bracket Race Engine
427ci 685hp SBC Bracket Race Engine Starts on Our 4-Axis CNC Centroid Machining Center Machined to Perfect Blue Print 4.400″ Bore Spacing, Perfect 9.000″ 45° +- bank angles are True Blue Print Machine work.
Fifty Years of Assembly, Machining, Dyno Testing Engines We’ve Learned the Better the Valve Train Stability Pays off with Less Problems and Maintenance and Oil is Cheaper than Engine Repair
Choosing Brodix T1X 60/40 VS, 2.100″ Intake Valves, CNC Ported Combustion Chambers and Jesel Shaft Rockers is the most Secure Road to go with this 427ci Bracket Race Engine Supports 300Hp of NOS with Proper Fuel and Timing Settings
$15,995.00
9.000″ Deck | 4.125″ Bore | 4.000″ Stroke | 6.000″ Rods | 685Hp @ 7200 rpm
Components
- Dart SHP or World Splayed Cap 100% 4 Axis CNC Race Prepped Block
- ARP 12 Point 234-4301 Head Stud Kit Plate Honed with the Block
- Dart or World Coated Cam Bearings and Block Small Parts Finish Kit
- Manley or Molnar 4340 4.000″ Lightweight Internally Balanced Steel Crank
- Molnar 6.000 Stroker” H Beam Steel Rods, 7/16 ARP2000 Bolts
- King H Series Main and Rod Bearings
- JE, Mahle or Wiseco 13.44:1 Compression Forged Pistons
- JE HNS, Mahle or Wiseco Power Adder Lightweight Ring Set
- JE, Mahle or Wiseco 9310 Tool Steel Power Adder .180″ Wall Wrist Pins
- AwesomeEngines® .700″ 7/4 Swap Steel Billet Std Base Circle Roller Cam
- Isky, Erson or Comp Cams Hippo Pin Oiler Roller Lifters
- Rollmaster Billet Timing Set IWIS Chain Torrington Bearing
- SFI Balancer, TDC Pointer, Blackout Timing Cover Kit
- Brodix T1X 222cc-68cc CNC Ported Combustion Chamber Heads
- Brodix 2.100-1.600″, PAC 1941 .700″ Springs, 10° Steel Retainers and Locks
- Cometic C4503 or Fel Pro MLS (Multi-Layered Steel) Head Gaskets
- Manley 5/16 x .120″ Wall SD Chrome Moly Push Rods
- Comp Cams Ultra 1.6 Ration Chrome Moly Rockers and Stud Girdle
- AwesomeEngines® Black Sheet Metal CNC Logo Valve Covers
- Melling M55 Hp 60psi Oil Pump, Moroso Pick Up Kit
- Moroso 7 Qt Oil Pan with Windage Tray Kit
- Brodix HV 4150 Intake Manifold
- CNC Match Ported Intake
- Proform 950 CFM Double Pumper Carburetor
- CNC Ported 2.000″ Phenolic Spacer and Installation Kit
- AwesomeEngines® Free 48 State Freight and Engine Cradle with Wheels
OPTIONS
Comp Cams Bushed No Needle Bearing Solid Roller Lifters
+ $ 500.00
Jesel 1.6 Ratio Shaft Rocker System
+ $ 900.00
MSD Crank Trigger System
+ $ 300.00
Moroso Metal Pro Eliminator Windage Baffle and Trap Door Oil Pan
+ $ 250.00
Moroso 3 Vane Vacuum Pump Kit Includes Pump, Brackets, Mandrel and Pulley Kit, Hoses and AN Fittings
+ $1400.00
ATI Super Dampener Honed to Specific ATI Requirements
+ $ 250.00
Holly Stealth EFI 850hp Fuel Injection Kit
+ $1500.00