Ford 302ci 350 Hp Street Heat Crate Engine
$7495.00
8.190″ Deck |4.030″ Bore | 3.000″ Stroke | 5.090″ Rods | 325Lb@ 2800 rpm and 350Hp @ 5500 rpm
Components
- Ford 302 2 Bolt Block Fully CNC Machined
- Bored 30-40-60, Decked, Aline Honed, Cam Bearings, Brass Plugs
- Ford Reconditioned Crank Balanced to Ext 50 oz. Specs
- Ford Recondition I Beam Conditioned with ARP Bolts
- King or Mahle-Clevite Main and Rod Bearings
- Mahle Forged Flat Top Pistons 10:1 Compression
- Mahle Performance Wrist Pin Package
- Mahle File to Fit Steel Ring Package
- M-6250-E303 Motorsport Hydraulic Roller Cam
- Double True Roller Timing Set
- Erson or Morel Hydraulic Roller Lifters
- Ford SFI 50 oz. 4 Bolt Late Harmonic Dampener
- Ford Later Model Cast Heads Completely Reconditioned
- All New Valve Guides, HP Intake and Exhaust Valves
- Bee Hive Valve Springs, Lightweight Retainers, Locks and Seals
- Fel Pro MLS Head Gaskets
- Chrome Moly 5/16 x .080″ Wall Push Rods
- Ford Stamped Steel 1.6 Rockers
- Aluminum CNC Engraved Valve Cover Set
- M63HP Melling Oil Pump and Moroso Pick Up Tube
- Front or Rear Sump Canton, Milodon or Moroso Oil Pan
- Dual Plane Air Gap Performer Intake
- Holley #83570 570 cfm Carburetor for Automatic Transmission
- MSD 83521 Pro-Billet Ready-To-Run, Magnetic Trigger Distributor
Options
Ford Motorsport 302 Race Block M6010-B302BB That Started it all off in Big SBF Engines
+ $2595.00
364ci Big Bore 4.125″ 475hp M-6250-F303 Pro Street Dart SHP Block, Moroso 7 Quart Pan 670 cfm Carburetor 6400 rpm Engine
+ $2395.00
374ci 4.185″ Max Bore 4340 Int/Bal Crank, H-Beam Rods M-6250-F303 Pro Street Dart SHP Block, Moroso 7 Quart Pan 670 cfm Carburetor 6500 rpm Engine
+ $3295.00
50oz SFI Flexplate and Fasteners
+ $ 225.00
50oz Steel Billet Flywheel and Fasteners
+ $ 395.00
Holley Sniper EFI Dyno Tested and Tuned
+ $1495.00
Dyno Tested & Tuned with Exxon Pump Gas 89° Fuel • HP Corrected To Sea Level
Actual Freight Cost Applies to this Engine Shipped to 48 State Zip Code Commercial Address or UPS Terminal