434ci SBC Pro Bracket Short Block
$8045.00
AwesomeEngines® Centroid 4-Axis CNC Machined Block • CNC Bored on 4.400″ Bore Centers • CNC Square Decked 90° From Cam and Crank to 9.000″ • CNC Blue-Print Radial Cleared for a 4.000″ Manley or Molnar Crank and Molnar ARP2000 Stroker Rods • Plate Honed to a Final 4.155″ Bore with Studs or Bolts • Cam Bearings • Block Small Parts Kit • Hot Washed • Professionally Assembled by one of the Best Engine Builders in the Country for any Application Being Used for with the Rotator Clearly Listed Below
World Professional Series 4 Bolt Main Splayed Cap Race Block • Manley or Molnar 4.000″ Stroke Internally Balanced 4340 Steel Crank • Molnar Stroker Series SD 4340 H-Beam Rods w/ARP 2000 Asymmetrical Bolts Included • JE or Wiseco 14:1 Pro Series Pistons for 23 or 18° Valve Angles • JE HNS Power Adder File to Fit Rings • King or Mahle H Series Bearings • Fel Pro Rear Main Seal
OPTIONS
Steel Billet Splayed Main Caps for Nitrous or any Power Adders
+ $595.00
Brodix Aluminum Hipped Steel Billet Cap Lightweight Block with Head Stud Kit
+ $5395.00
Ohio 4340 Steel Billet 8 Full Center Counterweight Cranks Usually Need No Heavy Metal for Big Power Adder Needed Heavier Parts up to 1700 Grams
+ $795.00
Callies 4340 Magnum 8 Full Center Counterweight Cranks Usually Need No Heavy Metal for Big Power Adder Needed Heavier Parts up to 1700 Grams
+ $1975.00
Wiseco Pro Series Gas Ported Pistons AFR 235/245
+ $245.00
H13 Tool Steel .180″ Wall Wrist Pins and Heavy Metal when Needed
+ $195.00
Heavy Metal if Needed Per Slug You Will be Notified for Either Crank
+ $100.00
Tool Steel M2 Rings for Power Adders
+ $375.00
Morel, Isky, Erson or Comp Cams Hippo Solid Roller Lifters
+ $975.00
Comp Cams Sportsman Bushed Solid Roller Lifters
+ $1495.00
ATI SFI Dampener Specific Honed to Crank Shaft
+ $295.00
Moroso Eliminator with Compartmental Windage Tray Right Hand Kick Out Oil Pan
+ $295.00
Cloyes 2 Piece Front Timing Cover
+ $175.00
Camshaft Kit with AwesomeEngines® Custom 7/4 Swap Billet Cam
+ $975.00
Deluxe Short Block Kit with SFI Dampener Honed to Crank Snout Specifications are always used
+ $1695.00