BBC 705ci 2000 Hp Nitrous Race Engine

705ci 2000+HP Nitrous Race Engine

$39,975.00

4.600″ Bore | 5.300″ Stroke | 1400+Hp Raw @7000 RPM & 1900HP with 1 Stage N2O

Components

  • Brodix Aluminum 55mm Raised Cam 100% CNC Race Prepped Block
  • Specific Fit 12 Point Head Stud Kit Plate Honed with Block
  • Intake Valley Inner Head Studs for Ultimate Gasket Seal
  • Callies Magnum Series Internally Balanced Crank
  • GRP Billet Aluminum Pro Mod Severe Duty Rods
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco Custom Quick 8 Gas Ported Anodized N2O Pistons
  • Precision Tool Steel .300 x 250″ Wall Wrist Pins
  • JE GFX Hell Fire, Total Seal SS or TNT 043 043 3.0 mm XD Rings
  • Competition Cams 7/4 Swap Billet 55mm Roller Cam
  • Jesel Raised 1″ Raised Cam Belt Drive
  • Isky EZ-Roll™ Extreme Zone 37296RHMEZMAX Bushed Roller Lifters
  • ATI Super Damper Specific Fit Honed to Crank Damper
  • AwesomeEngines® Billet TDC Pointer TDC Verified
  • Brodix 12° PB1204 Fully CNC Ported Heads
  • Victory Titanium 2.520 and 1.860 Valves
  • PAC Racing Triple Valve Springs
  • O Ring Block Receiver Groove Heads, SCE Copper Head Gaskets
  • Trend ½” x .200″ Taper Wall Severe Duty Push Rods
  • Jesel or T&D Shaft Rocker System
  • Moroso External Driven Oil Pump and Moroso Aluminum Pro Oil Pan
  • Return Oil Lines Plumbed from Heads to Pan
  • CFE 2×4 Sheet Metal Intake Manifold with N2O Bungs
  • NX #80019 200-500Hp 1st Stage VXL Direct Port NOS System
  • Jomar Special CNC Ported Spacers with Install Kit
  • 2 QFT 1450 cfm N2O FX Carburetors and Linkage
  • MSD Dist., Crank Trigger, 8.5 mm Wires, NGK NOS Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

NX 2×4 Assassin Dual for 500 More HP 2 Stage Twin Plate Systems
+ $1495.00
Moroso Complete Stage IV Vacuum Pump System with Pump Mounted Relief Valve, Mandrel, Lines, Tank and all Hardware Dyno Tested
+ $ 995.00
Power Master Ultra Made in the USA Starter, SFI Flex-plate and ARP Flex-plate Bolt Kit
+ $ 350.00
MAXX 3000HP Brand New Loaded PowerGlide Built for this Application
+ $5575.00
10″ Custom N2O Torque Converter, Steel Stator, Custom Pump and Turbine Built for 3000HP
+ $1795.00

Dyno Tested and Tuned Using C23 • Corrected to Sea Level

Free Freight Applies for this Engine Shipped to a Commercial Address Or Terminal Closest To Your Zip Code For Pickup In The 48 States

Comments are closed.

Skip to toolbar