Engine Freshen Up $3295.00
Machine Work and All Components Listed Below
- Disassembly of Complete Engine with Engraved Positions
- Remove all Cam Bearings and Block Plugs
- Hot Wash and Brush Block to Remove all Fluids
- Lube Fasteners #3 Lube, Torque to Specifications, Dial Gauge Align Bore
- Install Block in CNC Probe Decks for Squareness and Proper Heights
- CNC Top and Bottoms of Cylinders and Lifter Bores for any Wear
- Remove Block, Torque Plate with #3 Lube to Spec, Hone Cylinders
- Hot Wash, Blow Dry Block for Final Assembly
- Install New Cam Bearings, Brass or Stainless Freeze Plugs
- Clean, Magnaflux, Mic and Micro Polish Crankshaft
- Remove Pistons from Rods, Mic all Ring Lands, Pins and Bushings
- Stretch Rod Bolts to Specifications, Check Big Ends of Rods
- Every Old Part Returned to you For Your Inspection if Requested
- Disassemble Heads, Wire Wheel Valves Spotless Hot Wash
- Mic Guides and Valves Top to Bottom for Taper after De-burr
- Dye Seats and Hand Lap all Valves to Check for Proper Seal
- Check Surface of Heads for Straightness with Steel Straight Edge
- Check all Valve Spring Pressures for Evenness Shim to Pressure
- Install all New Positive Fit Valve Guide Seals
- Check all Locks, Reassemble Heads Complete to Perfection
- File Fit Engine Rings for Proper Clearance per Application
- Lube and Install Pistons on to Certified Perfect Connecting Rods
- Check Cam for Straightness and Degree Camshaft to Intake Openings
- TDC Pointer is TDC Verified and Set for Proper Timing Marks
- Engine Completely Assembled, CC For Actual Compression Ratio
- Engine Dyno Tested and Tuned to Perfection and Power Gains Recorded
Engine Freshen Up Parts List Included
Clevite HP Series Racing Main and Rod Bearings Sized Correctly
Included
Total Seal 1/16-1/16 3/16 File Fit Plasma Moly Ring Set
Included
Cometic or Fel Pro MLS Head Gaskets Installed For Proper Bore Size and Thickness per Proper Application
Included
One or Two Piece Rear Main Seals and One Piece Oil Pan Gaskets are used Exclusively
Included
Dura-Bond Cam Bearings or Block Manufactures Required Babbitt Bearings Installed
Included
Stainless Steel Freeze Plugs Installed for Life-Time Service
Included
16 New PC Style Valve Guide Seals Installed For Springs Used
Included
Lucas #10635 or Renegade 5w20 or 20w50 Racing Oil is Always and Only Used with Over 3000 PPM ZDDP
Included
Napa Black Gold Oil Filter
Included
Brand New Autolite or NGK Racing Proper Spark Plugs
Included
Hell Fire Rings Package (recommended to have over 900hp or a power adder engines)
$150.00
Any Machine Work Not Listed or Requested will be Priced Before Done and There are Never any Surprises Unless Notified and Approved by You
QUOTED