Ford 347ci 400 Hp Street Heat Crate Engine
$6990.00
8.195″ Deck |4.030″ Bore | 3.470″ Stroke | 5.400″ Rods | 400 lb@ 4400 rpm and 400Hp @ 5800 rpm
Components
- 302 Ford Block 100% CNC Race Prepared
- Bored 30-40-60, Decked 8.190″ Aline Honed, Cam Bearings, Brass Plugs
- Eagle 103023000 or Scat 9000 Crank Balanced to Ext 50 oz. Specs
- Eagle SIR5090 or Scat I Beam Bushed Full Floated Rods with ARP Bolts
- Clevite or King Main and Rod Bearings
- JE, Mahle or Wiseco Forged Racing Pistons 10:1 Compression
- JE, Mahle or Wiseco Performance Wrist Pin Package
- JE or Mahle Plasma Moly File to Fit Ring Package
- Comp Cams, Erson or Motorsport Hydraulic Roller Cam
- Double True Roller Timing Set
- Erson or Morel Hydraulic Roller Lifters
- Ford SFI 50 oz. 4 Bolt Late Harmonic Dampener
- Bracket Aluminum 190-64cc Cylinder Heads, Screw in Studs, Guide plates
- 2.02/1.60 Stainless Steel Valves
- PAC Racing Valve Springs, Retainers, Locks and PC Seals
- Fel Pro MLS Head Gaskets
- Chrome Moly 5/16 x .080″ Wall Push Rods
- Comp Cams or Erson 1.6 Roller Rockers
- Aluminum CNC Engraved Valve Cover Set
- M63HP Melling Oil Pump and Moroso Pick Up Tube
- Front or Rear Sump Canton, Milodon or Moroso Oil Pan
- Dual Plane Air Gap Performer Intake
- Holley #83570 570 cfm Carburetor for Automatic Transmission
- MSD #83521 Melonite Gear, Distributor, Wires and NGK Plugs
Options
50oz Flexplate or Flywheel
+ $75.00-$325.00
Holley Sniper EFI Dyno Tested and Tuned
+ $1495
Dyno Tested & Tuned with 89° Fuel • Vacuum Pump • HP Corrected To Sea Level
Actual Freight Cost Applies to this Engine Shipped to 48 State Zip Code Commercial Address or UPS Terminal