Mopar 525ci 790 HP RB Pro Street Engine
Mopar 535ci 790HP 4.500″ stroke Pro Street Crate Engine is a Direct replacement for any RB engine just 3/4″ .750″ more crank. All blocks media blasted, checked for any imperfections then are machined on our 4-axis CNC machining center on perfect 4.800″ blueprint bore center specifications. CNC 45° Parallel decked to 10.720″. Plate honed to a final 4.350 or 4.380″ bore. Perfectly .03-ozin Internally Balanced, then Assembled to Perfection. Straight to the Dyno to fine tune and prove all the performance listed. Best performance, power product with our in-house Hydraulic or Solid Roller camshafts. See Options Below for anything you may want (These listed Torque & Horsepower figures were Dyno Tested and Tuned with 93° Exxon pump gas, no vacuum pump or pcv just open hole in both valve covers
$14,495.00
Deck 10.720 | Bore 4.350 | Stroke 4.750 | Rod 7.100 | 815-lbs @ 4600 rpm 789Hp @ 6000 rpm
Components
- Mopar RB 100% CNC Race Prepped 440 Recon Block
- Main and Head Stud Kit Plate Honed with Block
- Brass Freeze Plugs for Lifetime Service
- 43404500or4750Stroke71002200BBC Rod Internally Balanced Steel Crank
- 4340 H-Beam Rods with ARP 2000 Rod Bolts
- Clevite or King H Series Main and Rod Bearings
- JE, Mahle or Wiseco Forged 11:1 Compression Pistons and .180 Wrist Pins
- JE HNS or Hell Fire Power Adder Rings
- Comp Cams or Erson Hydraulic Roller Cam
- Comp Cams Hippo Hydraulic Roller Lifters
- Rollmaster Timing Set with 9 Keyway Indexable Gear
- Chrome or Black Milodon Timing Cover and TDC Pointer
- SFI Approved Internally Balanced Damper
- TFS 270cc 100% Fully Ported Heads
- Hydraulic Roller Springs and Tool Steel 10° Retainers
- Cometic or Fel Pro MLS Head Gaskets
- Manley or Trend 3/8 x .080″ Wall Push Rods
- Comp Cams or Harland Sharp SD Shaft Rocker System
- AwesomeEngines® CNC Engraved Powder Coated Valve Covers
- Milodon External Pickup with Melling HP Oil Pump Kit
- Milodon or Moroso Oil Pan and Proper Pick-Up Tube Kit
- Indy Intake Manifold Block Cover
- Indy or TFS 4150 CNC Match Ported Intake Manifold
- Proform 4150-1050 CFM Carburetor
- MSD Distributor, 8.5 mm Plug Wires and NGK Plugs
- AwesomeEngines® Free 48 State Freight
Options
Callies Magnum Series 4340 Forged Crank
+ $1500.00
Competition Cams Solid Roller Camshaft, Bushed SD Roller Lifters, Springs, 10° Tool Steel Retainer and .135″ Wall Push Rod Kit
+ $1300.00
JE, Mahle or Wiseco .180″ Tool Steel Power Adder Needed Wrist Pins
+ $ 350.00
Manley or Trend .135″ Wall SD Chrome Moly Push Rods for Pro Street Solid Roller Camshaft and 7000 rpm
+ $ 200.00
Cometic or Fel Pro MLS Severe Duty Head Gaskets
+ Included
Holley Ultra or Quick Fuel Technology 1150 4500 Series Carburetor and Intake Manifold for 7000 rpm
+ $ 800.00
Moroso Vacuum Pump Complete System Installed, Dyno Tested and Tuned with Engine
+ $1400.00
B&M Flexplate and ARP Fasteners
+ $ 200.00
Power Master Ultra Starter Kit
+ $ 250.00