Mopar 565ci 835 Hp RB Pro Street Engine
Mopar 565ci 4.750″ when available for Pro Street Crate Engines. Direct replacement 93° pump gas Dyno Tested. RB blocks are machined on our Centroid CNC 4 Axis machining center on perfect 4.800″ blueprint bore specs, CNC 45° Parallel decked 10.720″. Plate honed to a final 4.350 or 4.380″ bore. Perfectly .03-ozin Internally Balanced, then Assembled to Perfection then Straight to the Dyno to fine tune and prove all the performance listed. Best performance, power, product with our house Proven Pro Street Camshafts. See Options Below
$15,995.00
Deck 10.720 | Bore 4.350 | Stroke 4.750 (w/ava) | Rod 7.100 | 825-lbs @ 4600 rpm 835 Hp @ 7000 rpm
Components
- Mopar RB 100% CNC Race Prepped 440 Recon Block
- Main and Head Stud Kit Plate Honed with Block
- Brass Freeze Plugs for Lifetime Service
- 4340475071002200BBC Rod Int/Bal Steel Crank (when ava)
- 4340 H-Beam Rods with ARP 2000 Rod Bolts
- Clevite or King H Series Main and Rod Bearings
- JE, Mahle or Wiseco Forged 11:1 Compression Pistons and .180 Wrist Pins
- JE HNS Power Adder Rings
- Comp Cams or Erson Solid Roller Cam
- Comp Cams Hippo Roller Lifters
- Rollmaster Timing Set with 9 Keyway Indexable Gear
- Chrome or Black Milodon Timing Cover and TDC Pointer
- SFI Approved Internally Balanced Damper
- TFS 270 Power Port 100% CNC Fully Ported Heads
- Manley Solid Roller Springs and Tool Steel 10° Retainers
- Cometic or Fel Pro MLS Head Gaskets
- Manley or Trend 3/8 x .135″ Wall Push Rods
- Harland Sharp SD Shaft Rocker System
- AwesomeEngines® CNC Engraved Powder Coated Valve Covers
- Milodon External Pickup with Melling HP Oil Pump Kit
- Milodon or Moroso Oil Pan and Proper Pick-Up Tube Kit
- Indy or TFS 4150 CNC Match Ported Intake Manifold
- 1″ Spacer and Mounting Hardware
- Proform 4150-1050 CFM Carburetor
- MSD Distributor, 8.5 mm Plug Wires and NGK Plugs
- AwesomeEngines® Engine Cradle
Options
565ci with Callies Magnum 4340 Internally Balanced Crank, Mopar 440 Block Bored, Plate Honed to Final 4.350″ or 4.380″for 573CI if Block Needs .060″ Over
+ $1495.00
632ci Monster Max Mopar Iron P5160212AA 45° Bank Angle .905″ Lifter Bore Block, 4.6″ Bore, 10.720 D-Height, .600″ Thick, Ext. Pick Up & Callies 4.75″ Crank
+ $4995.00
ATI SFI Super Dampener Specific Honed to Fit Crank Snout
+ $ 350.00
Competition Cams Bushed SD Roller Lifters
+ $ 795.00
Jesel Professional Series Shaft Rocker System
+ $ 975.00
Holley Ultra or Quick Fuel Technology 1150 4500 Series Carburetor and Intake Manifold for 7000 rpm
+ $ 745.00
Holley Sniper EFI Super Sniper Stealth Carburetor Styling Supports Up To 1250HP Boosted with 3.5″ Handheld Monitor
+ $1395.00
B&M Flexplate and ARP Fasteners
+ $ 175.00
Power Master Ultra Starter Kit
+ $ 250.00