Mopar 565ci 850 Hp RB Pro Street Engine
Mopar 565ci 4.750″ are now available for these specialty Pro Street Crate Engines. RB blocks are machined on our Centroid CNC 4 Axis machining center on perfect 4.800″ blueprint bore specs, CNC 45° Parallel decked 10.720″. Plate honed to a final 4.350 or 4.380″ bore. Perfectly .4-ozin Internally Balanced, Assembled to Perfection, Straight to the Dyno to fine tune and prove all the performance listed. Best performance, power, product with our house Proven Pro Street Camshafts
$15,995.00
Deck 10.720 | Bore 4.350 | Stroke 4.750 (w/ava) | Rod 7.100 | 825-lbs @ 4600 rpm 850 Hp @ 6500 rpm
Components
- Mopar RB 100% CNC Race Prepped 440 Recon Block
- Main and Head Stud Kit Plate Honed with Block
- Brass Freeze Plugs for Lifetime Service
- 4340475071002200BBC Rod Int/Bal Steel Crank (now ava)
- 4340 H-Beam Rods with ARP 2000 Rod Bolts
- Clevite or King H Series Main and Rod Bearings
- JE, Mahle or Wiseco Forged 11:1 Compression Pistons and .180 Wrist Pins
- JE HNS Power Adder Rings
- Erson, Isky Comp or Erson Solid Roller Cam
- Isky, Erson, Comp or Morel Hippo Roller Lifters
- Rollmaster Timing Set with 9 Keyway Indexable Gear
- Black, Chrom or Gold Milodon Timing Cover and TDC Pointer
- SFI Approved Internally Balanced Damper
- TFS 270 Power Port 100% CNC Fully Ported Heads
- Manley Solid Roller Springs and Tool Steel 10° Retainers
- Cometic MLS Severe Duty Head Gaskets
- Manley or Trend 3/8 x .135″ Wall Push Rods
- Harland Sharp SD Shaft Rocker System
- AwesomeEngines® CNC Engraved Powder Coated Valve Covers
- Milodon External Pickup with Melling HP Oil Pump Kit
- Milodon or Moroso Oil Pan and Proper Pick-Up Tube Kit
- Indy or TFS 4150 CNC Match Ported Intake Manifold
- 1″ Spacer and Mounting Hardware
- Proform 4150-1050 CFM Carburetor
- MSD Distributor, 8.5 mm Plug Wires and NGK Plugs
- AwesomeEngines® Engine Cradle
Options
565ci with Callies Magnum 4340 Internally Balanced Crank, Mopar 440 Block Bored, Plate Honed to Final 4.350″ or 4.380″for 573CI if Block Needs .060″ Over
+ $2995.00
612ci Monster Max Mopar Iron P5160212AA 45° Bank Angle .904″ Lifter Bore Block, 4.530″ Bore, 10.720 D-Height, Ext. Pick Up & Callies 4.750″ Crank
+ $8495.00
ATI SFI Super Dampener Specific Honed to Fit Crank Snout
+ $ 350.00
Isky, Erson, Comp or Morel Bushed Roller Lifters
+ $ 895.00
Jesel Sportsman Series Shaft Rocker System
+ $ 975.00
Holley Sniper EFI Super Sniper Stealth Carburetor Styling Boosted with 3.5″ Monitor
+ $1595.00
Holley Terminator Bar for Boosting Carburetor Styling Boosted with 3.5″ Monitor
+ $1995.00
B&M Flexplate and ARP Fasteners
+ $ 175.00
Power Master Ultra Starter Kit
+ $ 250.00