Mopar Monster 632ci 975Hp RB Pro Street Engine

Mopar Monster 632ci 975 Hp RB Pro Street Engine

Mopar Monster 632ci 4.600″/4.750″ Pro Street Crate Engine is a Direct replacement for 93° pump gas applications. After Market Callies Mopar RB blocks machined on our 4-axis CNC machining center on perfect 4.800″ blueprint bore specifications, CNC 45° Parallel decked to 10.750″. Plate honed to a final 4.600″ bore. Perfectly .03-ozin Internally Balanced, then Assembled to Perfection. Straight to the Dyno to fine tune and prove all the performance listed. One of the Best performance power products with our in-house Hydraulic or Solid Roller camshafts. See Options Below for anything you may want (These listed Torque & Horsepower figures were Dyno Tested and Tuned with 93° Exxon pump gas, no vacuum pump or PCV and 2 valve cover breathers

$27,495.00

Deck 10.750 | Bore 4.600 | Stroke 4.750 | Rod 7.100 | 905-lbs @ 5500 rpm 975-Hp @ 7000 rpm

Components

  • Mopar Callies P5160212AA Cast Iron Hi-Performance Block
  • Head and Main Stud Kit Plate Honed with Block
  • Callies Magnum 4340 Internally Balanced Steel Crank
  • 4340 H-Beam Rods with ARP 2000 Rod Bolts
  • Clevite or King H Series Main and Rod Bearings
  • JE or Wiseco 1.270″ch 11:1 2618 Dish Pistons and .180″ Wall Pins
  • JE HNS Power Adder File to Fit Rings
  • Comp Cams or Erson Solid Roller Cam
  • Comp Cams Hippo Bushed Solid Roller Lifters
  • Rollmaster Timing Set with 9 Keyway Indexable Gear
  • Chrome or Black Milodon Timing Cover and TDC Pointer
  • ATI SFI Internally Balanced Super Damper
  • Indy 572-13CNC 375cc Fully Ported Heads with 2.35/1.88
  • Manley Roller Springs and Tool Steel 10° Retainers
  • Cometic MLS Severe Duty Head Gaskets
  • Manley or Trend 3/8 x 135″ Wall Push Rods
  • Jesel Shaft Rocker System
  • AwesomeEngines® CNC Engraved Powder Coated Valve Covers
  • Milodon External Pickup with Melling HP Oil Pump Kit
  • Milodon or Moroso Oil Pan and Proper Pick Up Tube Kit
  • Indy CNC Match Ported Intake Manifold
  • Proform 1050 CFM Double Pumper Carburetor
  • MSD Distributor, 8.5 mm Plug Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

Options

JE Tool Steel .200″ Power Adder Wrist Pins
+ $  200.00
I Beam Extreme Duty Steel Rods
+ $  200.00
Isky Red Zone Bushed Extreme Duty Roller Lifters
+ $  600.00
Holley Sniper EFI Super Sniper Stealth Carburetor Styling Supports Up To 1250HP Boosted with 3.5″ Handheld Monitor
+ $1400.00
B&M Flexplate and ARP Fasteners
+ $ 200.00

Dyno Tested & Tuned with 93° Pump Gas • HP Corrected To Sea Level

Free Freight for Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar