Mopar RB 426ci Wedge Engine Special
$9975.00
Bore 4.250″ | Stroke 3.750″ | Rod 6.776″ | Torque 500lbs @ 4400 rpm – Hp 505 @ 5500 rpm
Mopar RB 426ci Wedge Engine Special 4 Axis Centroid CNC Machine Bored Stock Block on 4.8″ Bore Spacing Centers to 4.245″, CNC Decked, Align Honed, Plate Honed to 4.250″, Recon-Forged Steel Crank .010 .010, Heads New Except Castings, Recon-Mopar Forged Steel Rods with New ARP Rod Bolts, Forged Pistons, Rings, Bearings, Block Plug kit, Cam, Lifters, Timing Kit, Push Rods, Gaskets included, Balanced and Blue-Printed Top to Bottom Assembled to a Complete Hi-Performance Engine
- Mopar RB 10.720″ Block 100% 4 Axis CNC Machined Block
- Head Bolts Plate Honed with the Block
- Cam Bearings and Stainless Steel Freeze Plugs
- Mopar .010/.010 Internally Balanced Steel Crank
- Mopar Stock Forged Rods with ARP 8740 Rod Bolts
- King Main and Rod Bearings
- Wiseco 10:1 Compression Forged Flat Top Pistons
- Plasma Moly File to Fit Rings
- COMP Cams Hydraulic Roller .550″ Lift Cam Shaft
- Competition Cams Hydraulic Roller Lifters
- Double Roller 9 Keyway Billet Timing Set
- Milodon Timing Cover and TDC Pointer
- New Harmonic Damper
- Mopar Steel Wedge Heads with 3 Angle Rolled Radius Valve Job
- New Valve Guides, Hardened Seats, Stainless Steel Valves
- New COMP Cam Springs, Locks, Moly Retainers and PC Seals
- Fel Pro #1009 Head Gaskets
- Manley 3/8 x .135″ Thick Wall Push Rods
- Mopar Shaft Rocker System
- Mopar CNC Engraved Valve Covers
- Melling M63 60lb High Pressure Oil Pump Kit
- 6 Qt. Oil Pan with Proper Pick-Up Tube
- New Dual Plane Aluminum Intake
- ProForm 850cfm Double Pumper Carburetor
- Mopar Recondition HEI Distributor, MSD 8.5mm Plug Wires and NGK Plugs
- AwesomeEngines® up to $300.00 Free 48 State Freight Cost
OPTIONS
Single Plane HP 4150 Intake Manifold
+ $ 195.00
COMP Cams or Erson Pro Street Solid Roller Cam, Lifters, Springs and Retainer Kit
+ $ 695.00
SFI Approved Damper
+ $ 195.00
MSD RTD-Ready to Run Pro Billet Distributor, MSD Coil and Bracket Kit
+ $ 695.00
Holley EFI Electronic Fuel Injection Sniper Kit Dyno Tested and Tuned RTD-Ready to Run
+ $1995.00
Flexplate and ARP Bolt Kit
+ $ 195.00
Steel Billet Internally Balanced Flywheel and ARP Bolt Kit for Manual Transmission
+ $ 495.00