Small Block Chevrolet Bracket 195cc Aluminum Heads

Small Block Chevrolet Bracket 195cc Aluminum Heads

$1095.00 per pair

Small Block Chevrolet Bracket 195cc Aluminum heads, Straight or Angle Plug that work very well on 350 to 440ci engines. The Valve job and complete assembly set up for whatever camshaft you need it for is done in house by Bill Cannon himself on every cylinder head. Valves, valve guides, seals, spring cups, ,shims and retainers are lubed for easy break in.


  • 356T6 Aluminum Castings
  • Bronze Alloy 11/32″ Valve Guides
  • Multi Angle 2.02/1.60 Valve Job
  • 7/16 x 3/8 Screw In Studs and 5/16 Guide Plates
  • 64 cc Combustion Chambers with Straight or Angle Plug
  • 2.020 1.600 +.100″ Stainless Steel Valves
  • Valve Seats Dyed and Hand Lapped to Insure Perfect Seal
  • 1.440″ .600″ Solid Flat Tappet or Hydraulic Roller Valve Springs
  • Seals, Springs Cups and 10° Chrome Moly Retainers
  • Screw In Studs and Guide Plates for Your Application


Angle Plug with Steam Holes Drilled
+ $150.00
2.050″ Intake Valve Job
+ $150.00
Ferrea Inconel Exhaust Valves
+ $295.00
Comp Cams 1605-16 Pro Magnum Rocker 1.5 Arms
+ $475.00
.500″ Lift 1.260″ Flat Tappet Hydraulic Valve Springs for Stock or Small High Performance Camshaft
Solid Roller Valve Springs with Steel Retainers
+ $375.00
Cometic or Fel Pro #1142 4.100/.041/9.0cc or 1143/4.165/.041/9.2cc MLS Head Gaskets
+ $180.00

Cylinder heads have specific build sheet, part numbers, spring rates, installed height, coil bind figures supplied with Cylinder Heads

Free Ground Shipping UPS or USPS to a Your Address in the 48 States

Comments are closed.

Skip to toolbar